Products Laser application system
Laser Patterning Machine based on Roll to Roll System
µ-R2R
이 장비는 μ-R2R 모델로, 롤투롤에 기반한 레이저 패터닝 장비입니다. MOTF(Marking on the fly) 로 동작하고, 가공면적은 200~300mm, 롤은 분당 3m 속도로 동작합니다.
사양
- 동작모드 : MOTF(Marking on the fly)
- 적용분야 : Flexible Film( for ITO/FTO, Perovskite material), Printed Electronics, PSC(Perovskite Solar Cell), OPVs(Organic Photovoltaics), CIGS, OLED, Touch Panel, etc
- Roll 폭 : ≤300mm
- 재질 : PET, PEN, Paper etc
- 재질 두께 : 100~ 188 um
- Roll 속도 : ≤ 3 m/min
- 위치 정확도 : ≤±25 um
- Laser source : Pico Laser(1064nm / 532nm / 355nm )
- Bream Delivery : Galvo scanner
- Size : ~ 4150 X 1200 X 2000mm
Application of R2R
Printed Electronics
Solar cell (Perovskite) / FPCB / OLED / Touch Panel etc.
μ-Fab R2R
| Laser / Wavelength | Pulsed (Nanosecond / Picosecond / Femtosecond), Single (1064nm / 532nm / 355nm) |
| Operation Mode | MOTF, Continuous Synchronized Motion (Galvano Scanner + Web Moving) |
| Travel Range | Scan Area 300 x 300mm2 ( Web Width 300mm ) (Depends on the requirement size) |
| Accuracy | ±0.5μm |
| Repeatability | ±0.5μm |
| Vision Alignment | Off Axis Machine Vision System (2 Camera – Line Scan) |
| Option | Top Hat Beam |
| Supported Drawing Format | DWG, DXF, JPEG |
| Application | Perovskite Composite / Flexible Film / Printed Electronics |
| Dimension (W x D x H). Weight | 4150 x 1200 x 1550(mm), 3.5t, Total Module (unwinder-Laser Patterning-Rewinder) |
※ Alternative laser module for different wavelength , output power can be adapted depending on the applications
